Biography
CCPトレーニング & CCP無料模擬試験
さらに、JPTestKing CCPダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1weoyH6hJpRpIHyhMswLIJa8YhovZEKKn
JPTestKingのCCP無料デモの合格率に関する記録で実証されているように、AACE International合格率は設立当初から98％〜99％の歴史的記録を維持しています。 現時点では、CCPテストトレントの合格率は他の試験テストの合格率と比較して最高と言えますが、着実に進歩しているという真実を知っているため、専門家全員が現在の結果に満足することはありません CCP準備資料は、Certified Cost Professional (CCP) ExamのCCP試験問題作成の分野で永久に勝つことができますか。
CCP試験は、多肢選択式の部分とエッセイ式の部分で構成されています。多肢選択式の部分は、コストエンジニアリング、プロジェクト管理、スケジュールに関する知識を試験します。エッセイ式の部分は、コストエンジニアリングとプロジェクト管理に関する問題を分析し解決する能力を評価します。この試験は合格率が50%以下であり、コストエンジニアリングの原則、手法、手順についての熟練度を証明する必要があります。
>> CCPトレーニング <<
CCP試験参考書、Certified Cost Professional (CCP) Exam CCP練習テスト
知識の時代の到来により、私たちはすべて、CCPなどの専門的な証明書を必要としています。したがって、有用な実践教材を選択する正しい判断を下すことは非常に重要です。ここでは、心から誠実にCCP実践教材をご紹介します。 CCPスタディガイドを選択した試験受験者の合格率は98％を超えているため、CCPの実際のテストは簡単なものになると確信しています。
AACE International CCP（認定コストプロフェッショナル）認定試験は、コスト管理分野で最も認識されている認定資格の一つです。この認定は、コストエンジニアリングの分野を進めることに専念する専門家組織である国際コストエンジニアリング推進協会によって提供されます。認定試験は、基本的なコスト管理原則から高度な戦略的意思決定まで、コストエンジニアリングの知識と専門知識を検証するよう設計されています。
AACE International Certified Cost Professional (CCP) Exam 認定 CCP 試験問題 (Q11-Q16):
質問 # 11
If a project is said to be on a "fast track program/' the fast track method is:
- A. Simultaneous working engineering, procurement, and construction, with appropriate overlap from each phase of work so that delays are eliminated and all the work is streamlined into a correct plan of logic/sequence and duration for all of the work
- B. Revising the schedule logic to make it possible to identify constraints of faulty logic; revising the durations in the n p schedule that have been based on assumptions regarding the hay the work would be performed; revise the resources to work multiple shifts; evaluate the use of overtime
- C. First completing engineering and procurement, then executing construction
- D. Analyzing the project and specifying the basic approach to be used in its execution; segmenting the project into reasonable number of activities; estimating the time required to perform each activity; placing the activities in time order, considering both sequential and parallel performance
正解：A
解説：
The fast track method in project management is a technique that involves overlapping the phases of engineering, procurement, and construction. Instead of completing these phases sequentially (which is typical in traditional project management), fast tracking allows for simultaneous work on these phases with appropriate overlap. The goal is to reduce the overall project duration by eliminating delays and streamlining the work into a logical and efficient sequence. This method is often used in projects where time is a critical factor.
Option B describes a traditional sequential approach, not fast tracking.
Option C outlines the process of project scheduling and planning, which involves sequencing activities but does not address the simultaneous execution of phases.
Option D focuses on schedule revision and constraint identification, not the simultaneous execution characteristic of fast tracking.
Thus, A. Simultaneous working engineering, procurement, and construction is the correct answer.
質問 # 12
An agricultural corporation that paid 53% in income tax wanted to build a grain elevator designed to last twenty-five (25) years at a cost of $80,000 with no salvage value. Annual income generated would be $22,500 and annual expenditures were to be $12,000.
Answer the question using a straight line depreciation and a 10% interest rate.
The following question requires your selection of CCC/CCE Scenario 17 (4.2.50.1.1) from the right side of your split screen, using the drop down menu, to reference during your response/choice of responses.
Assuming a 53% tax rate, how much cumulative depreciation will have been claimed at the end of the grain elevator's life span?
- A. None
- B. $80,000
- C. $42,400
- D. $37,600
正解：B
解説：
Straight-line depreciation means that the cost of the asset is evenly spread over its useful life. Given that the grain elevator has a cost of $80,000 and a lifespan of 25 years, the cumulative depreciation at the end of its life span would be the entire initial cost of the asset. Since there is no salvage value, the full $80,000 will be depreciated over 25 years. Thus, the correct answer is D. $80,000.
質問 # 13
The following question requires your selection of CCC/CCE Scenario 28 (3.7.50.1.7) from the right side of your split screen, using the drop down menu, to reference during your response/choice of responses.
An unbalanced bid methodology can best be used by:
- A. Subcontractor working for contractor (Plan A or B)
- B. Contractor working directly for engineer (plan A or B)
- C. Engineer working for the owner (Plan A)
- D. Engineer/contractor working for the owner (Plan B)
正解：B
解説：
Given Scenario:
The question is similar to Question 83, asking who can best use an unbalanced bid methodology.
The correct answer here remains consistent with the logic applied in Question 83. Subcontractors working for contractors in both organizational plans can leverage unbalanced bids.
Answer : B. Subcontractor working for contractor (Plan A or B)
質問 # 14
A major theme park is expanding the existing facility over a five-year period. The design phase will be completed one year after the contract is awarded. Major engineering drawings will be finalized two years after the design contract is awarded and construction will begin three years after the award of the design contract. New, unique ride technology will be used and an estimate will need to be developed to identify these costs that have no historical data.
Which of the following methods a used for creating critical path schedules:
- A. Precedence and arrow diagram methods only
- B. Arrow diagram method
- C. Gantt chart (bar chart) method
- D. Precedence diagram method
正解：A
解説：
Given Scenario:
Methods for creating critical path schedules are inquired.
The Precedence Diagramming Method (PDM) and Arrow Diagramming Method (ADM) are commonly used for critical path schedules. The Gantt chart, while useful for visualizing schedules, does not inherently calculate the critical path.
質問 # 15
Deliberate low bidding is often referred to as buying the job. Which of the following would not be a reason for low bidding?
- A. Survival
- B. Backing out of the bid competition
- C. Detecting significant errors in the purchaser's request for quote
- D. Reducing cm eliminating competition
正解：B
解説：
Deliberate low bidding, sometimes referred to as "buying the job," is a strategy where a contractor bids below cost to win a contract, with the expectation of recouping losses through change orders, future projects, or other means.
Key Points:
Reasons for Low Bidding:
Survival: Contractors might low bid to secure work during tough economic times.
Reducing Competition: A low bid can push competitors out of the market.
Detecting Errors: Identifying significant errors in the purchaser's RFQ might lead to a strategic low bid.
Backing Out of Bid Competition:
This option does not align with the strategy of low bidding. Backing out would remove the contractor from the competition entirely, which is contrary to the purpose of low bidding.
Conclusion: The correct answer is B. Backing out of the bid competition because this action is not a reason for low bidding-it is the opposite of participating in the bid.
質問 # 16
......
CCP無料模擬試験: https://www.jptestking.com/CCP-exam.html
P.S. JPTestKingがGoogle Driveで共有している無料かつ新しいCCPダンプ：https://drive.google.com/open?id=1weoyH6hJpRpIHyhMswLIJa8YhovZEKKn
